precise investment casting items the goal of tempering in the following places
1, lowering the brittleness, eliminating or minimizing stress, precision castings quenching blocks tension and brittleness, if not to temper tends to produce precision casting distorted as well as cracking.
2, receive the necessary mechanical properties from the workpiece and workpieces quenched hardness and brittleness, to be able to meet the a variety of specifications of the distinct properties in the workpiece is usually adjusted by suitable tempering tie hardness, decreases brittleness and toughness required to get the plastic.
3, stable workpiece size
4, for annealing to soften a few of the steel, hardened (or fire) is frequently utilised right after tempering, so suitable aggregation of carbides in steel, to cut down the hardness to facilitate cutting.
Secondly, normalizing the production of precision castings also requires normalizing Normalizing is heating the casting to above the critical temperature 30-50, holding the suitable time, in nonetheless air cooling from the heat therapy approach is named normalizing. Normalized fine-grained structure will be the main purpose, improving overall performance, get close towards the equilibrium in the organization.
Normalizing and annealing process, whose key difference is normalizing cooling slightly more quickly, as a result normalizing brief production cycle. Annealing and normalizing functionality requirements can also reach components, utilised fire as a lot as you can. Most of the middle and low carbon steel billets are normalizing. Alloy billet annealing is normally employed, in the event the normalized, for the reason that cools more rapidly, generating the water hardness is high, isn't conducive to cutting.
Source:www.hongyicasting.com
